Slickline Equipment

Engages and retrieves miscellaneous loose objects from the well

Fits over a given size of Pulling Tool, so that it can be easily centralised in larger ID tubing

Jars an obstruction downward through the tubing string to a position where it can cause least inconvenience

Locates and retrieves cut or broken slickline or small diameter braided cables from the well bore, during fishing operations

A heavy-duty fishing tool designed for internal engagement of tubular items within the wellbore

Retrieves broken wireline from the well. Typically used where recovery attempts with multi-prong wire grabs have been unsuccessful

Engages external fishing necks on Subsurface devices within the well-bore and withstands high impacts that would cause damage to standard pulling tools

Allows the operator to take an impression of unknown objects within the well

Enables continuous downward jarring to latch the fish neck without risk of prematurely shearing the jar-down-to-release pin

Available in a range of sizes, each with an adjustable range to fit the ID of many pipe sizes.

Hunting’s Ezi-Adjust Wire Recovery Tool is available in different sizes, each with an adjustable range to fit the ID of various pipe sizes.

The Hunting Go Devil is designed to cut and retrieve wireline from a stuck tool string

The Hunting Releasable Overshot is designed to engage tools that have damaged or have no fish necks.

The Hunting Heavy-Duty releasable spear is designed to engage assemblies that have damaged fish necks or no fish necks.

The Hunting Skirted Magnet is designed to retrieve ferrous debris from the top of tools in the well.

Locates and balls the upper end of the broken cable in the wellbore during fishing operations.

Providing a simple, effective solution for some unique fishing requirements.

Locates and balls the upper end of the broken cable in the wellbore during fishing operations

Augments the performance of upstroke jars and uses disc spring as opposed to conventional helical springs

Retrieves broken wires during fishing operations

Allows chemicals such as acids or other fluids to be spotted on top of any subsurface device in the well

Removes debris which has settled on a subsurface control preventing retrieval by regular intervention methods

Removes sand and other debris, which may have settled on top of any sub-surface control within the well, preventing retrieval of the control by regular wireline operations.

Acquires samples of debris causing an obstruction in the well for analysis

Loosens and removes paraffin wax and scale deposits from inside the wall of the completion bore

Locates the end of the production tubing, allowing the total depth to be measured

Clearing slight tubing collapse and other obstructions in the completion tubing string, allowing other services to be performed

Heavy-duty tools with hardened and tempered, segmented cutting mandrel sets preventing potential fishing operations.

Hunting Conventional Diamond Backed Broaches are heavy duty tools with hardened and tempered cutting mandrels, designed to broach out tubing restrictions in the well bore.

Designed to break up compacted sand deposits and other debris that may have formed within the completion tubing

Designed to gauge the pipe and scrape clean paraffin, wax and other debris from the inside wall of the completion tubing string

Hunting’s Junk Catchers provide an easy and economical method to protect retrievable plugs and other downhole equipment from debris settling when performing remediation above.

Several tools combined into one designed to drift, clean, and collect debris samples

Used to identify the location of Nipple profiles and/or the end of the production tubing for depth correlation

Dampens impact shock loads that can occur during wireline deployment and prevent damage to sensitive instrumentation being run on the tool string

Hunting offers different Slickline tool connections to fit the customer requirements.

Allows tools with different connection types to be run in the same tool string

Similar to knuckle joints and incorporates an extended ball mandrel and ball mandrel body

Provides flexibility within the tool string - one or more Knuckle Joints can be placed into the tool string

Ensures free rotation of down hole tool string assemblies even when the tool string is held in significant tension

Reduces tool string lift when sudden pressure or fluid surges may blow a tool string up the well.

Hunting’s Gauge Carrier was designed to provide shock resistance to the memory gauges where well conditions require moderate jarring when the gauges need to be left in the well below a lock assembly or gauge hanger during flow testing.

The Linear Jar was designed to enhance extended reach jarring efficiency in high angle wells.

Mechanical Link Jars, also referred to as “Spang jars” are designed to act like a sliding hammer.

Tubular jars are bi-directional mechanical jars used when the jarring action of standard link type Spang jars could be impeded by wire, debris or other foreign substances in the pipe.

The Hunting Spring Jar is easily calibrated and tested at surface using the Hunting Calibration sub.

Attaching Slickline cable to the tool string, predominately for small diameter Slickline cables up to and including 0.092”

Used to attach the Slickline cable to the tool string and can be used with Slickline sizes from 0.092” to 0.160”

Designed to release in the event tool string cannot be recovered and the wire should not be separated from the rope socket

Designed to cut the cable internally leaving a clean fishing neck should the tool string become stuck in the well

A safe and convenient tool for testing the integrity of a rope socket or pull testing a slickline cable

Hunting Hydraulic Wireline Jars are normally situated above a set of mechanical link jars.

The Hunting Spring Jar is designed to impact a very high impact load to a tool string without excessive jarring action

Designed to centralize tool strings during slickline operations in the production tubing and upon exiting into the casing

The Hunting Fluted Centraliser is designed to centralize wireline tool strings inside the tubing, during operations in deviated wells.

Hunting Roller Wireline Stem Bars are designed to replace conventional stem bars for operations in deviated well bores.

Hunting Wireline Stem/Weight Bars, sometimes referred to as ‘sinker bars’, are designed to serve two purposes.

Hunting Lead Filled Wireline Stem Bars provide the weight required to overcome friction and pressure differential

Hunting Tungsten Filled Wireline Stem Bars, often referred to as “sinker bars”, are designed to serve two purposes.

Primarily used to hold the line above the closed WLV (Wire Line Valve) during fishing operations, the clamps are fitted with brass inserts that are sized to the cable.

The Hunting Wire Ductility Tester is a simple, effective tool, compact in design and convenient to be used anywhere.

The Otis D Running Tool sets the type D collar lock mandrel in the tubing collar recesses of EUE (or similar) type tubing.

The Otis J Running Tool sets the type J, E, P, F and L Otis locking mandrels in the Otis type J, E, P, F and L landing nipples.

The Otis® R Running Tool is designed to deploy and set sub surface flow control devices equipped with R and RN® lock mandrels, landing in corresponding selective or no-go landing nipples.

The Otis RXN Running Tools set type X®, XN®, R®, RN®, RPT® and RQ Otis Lock Mandrels in the top type X, XN, R, RN and RQ Otis Landing Nipples.

The Otis W Running Tool sets the types C, B and W Slip type Otis mandrels in the tubing.

The Otis X Running Tool is designed to deploy and set sub surface flow control devices equipped with X® and XN® lock mandrels, landing in corresponding selective or no-go landing nipples.

The Otis GR Pulling Tool is a combination of two assemblies, an Otis GS pulling tool and an Otis GU adapter.

The Otis GS Pulling Tool is designed to deploy and retrieve sub-surface devices with internal fishing necks.

The Otis GU Shear Up Adaptor is designed to convert a standard GS, jar down to shear tool, into a GR, jar up to shear tool.

The Otis R Pulling Tool is designed to engage external fi sh necks on Subsurface devices within the well-bore.

The Otis S Pulling Tool is designed to engage external fish necks on subsurface devices within the well-bore.

The Otis Tubing Perforator Punch is a mechanical device, designed to perforate standard and heavy wall tubing, under pressure.

Hunting can supply various Otis® running and pulling prongs. Please specify requirements for quotation.

Otis 142BO selective positioning tools are designed to selectively shift the inner sleeve of a sliding side door circulating device into the down position only.

The Otis B positioning (shifting) tool is designed to move the inner sleeve to an open or closed position in the type XA, RA, XO and XD Otis sliding side doors.

Especially suited to highly deviated wells, the Roller Kickover Tools consist of a conventional kickover tool modified to incorporate swivel Roller subs at the top and bottom of the tool.

Camco DH running tools are wireline service tools are used to install Camco hydraulic shear sleeve shifting tools in the shifting profile of a tubing retrievable subsurface safety valve or a hydraulic communication nipple.

Camco ‘D’ series running tools are wireline service tools that are used to install Camco C series, CS series, HP-C or C-BNS ‘No Go’ locks and attached subsurface control devices in appropriate Camco D series ‘No Go’ landing nipples.

The Camco ‘JD’ series pulling tool is designed to engage external fishing necks on Sub-surface devices within the well-bore.

The Camco ‘JU’ series pulling tool is designed to engage external fishing necks on Sub-surface devices within the well-bore.

Camco ‘OK’ series kickover tools are used to install 1” OD side pocket subsurface control devices into Camco KBG and KBMG series side pocket mandrels, or to retrieve those devices as required.

Camco ‘OM’ series Kickover tools are used to install 1 ½” OD side pocket subsurface control devices into Camco side pocket mandrels fitted with an orienting sleeve, or to retrieve side pocket subsurface control devices as required.

Camco ‘PRS’ series pulling tools are wireline service tools that are used to retrieve sub-surface devices with internal fishing necks.

Camco Side Pocket Mandrel Accessory Running Tools are wireline service tools used to install 1” and 1 1/2” OD side pocket subsurface control devices in side pocket mandrels.

Camco Type ‘C’ shifting tools are wireline service tools used to shift the inner sleeve of a Camco sliding sleeve.

Camco ‘W’ series running tools are wireline service tools used to install Camco M series selective locks and attached subsurface control devices in the appropriate Camco W series selective landing nipples.

Camco ‘Z-5’ series running tools are wireline service tools that are used to install Camco Z-5 collar locks in the collar recesses of the tubing string.

Camco ‘Z-6’ running tools are used to install Camco DB series locks and attached subsurface control devices in Camco 4” to 7” No-Go landing nipples with DB profiles.

‘OM’ Series Roller Kickover Tools use key components manufactured by Hunting to original Camco designs and specifications.

Flopetrol Stretch Simulators are designed to compensate for insufficient stretch or elasticity of the wireline (for example, at or near the surface).

A wireline cutter is required when a slickline or braided wireline must be cut in the well. The Flopetrol cutter is attached over the wire, dropped from surface, cutting the wire and retrieving the wire and cutter.

The Flopetrol self-releasing overshot is used to fish wireline tools that have no fishing neck, as well as damaged wireline tools and sucker rods that cannot be fished using conventional tools.

The Flopetrol self-releasing spear is used to fish a wireline tool with a damaged fi shing neck, or a cylindrical tool without any internal fishing neck.

Upstroke jars are used for jarring upwards during wireline pulling operations.

Merla HDTMP series positioning tools are used to install or retrieve 1” OD gas lift valves into Merla TMP and TMPD types of side pocket mandrels.

Merla HDTP series positioning tools are used to install or retrieve 1 1/2” OD valves into Merla TGPD and TGD types of side pocket mandrels.

To complement the HDTP and HDTMP series gas lift mandrels, Merla developed the HDTP and HDTMP positioning tools to make wireline work more efficient, particularly in deviated wells.